Home
Hose & Cords
3-Prong Female Plug

3-Prong Female Plug

Schmidt

$38.59

(No reviews yet) Write a Review

SKU:: 7109-300
UPC:
Weight:: 1.00 LBS

Female plug, 3-prong twist lock, Part # 7109-300

Description

Female plug, 3-prong twist lock, Part # 7109-300

Related Products
Customers Also Viewed

Crowfoot 2 Claw 1" FPT - Part # 21DPFE100 — Quick view Add to Cart

NECO

1" 2 Claw

$4.90

2" Ground Joint, Female Spud - Part # 27GJFS200 — Quick view Add to Cart

NECO

2" Female Spud, Ground Joint

$25.36

Crowfoot 4 Claw 1-1/2" FPT - Part # 21DPFE150 — Quick view Add to Cart

NECO

1-1/2" 4 Claw

$13.91

Conversion kit, pneumatic to electric. Kit includes control valve with dust eliminator, brass strainer, and 2-wire 12-V power supply with male and female three-prong plugs (fully assembled as seen in picture above). Kit also includes deadman with male plug attached, 55ft extension with male and female plugs, 25ft power cord with alligator clips and female plug, 6ft of 1/4" push-on hose with 1/4" and 1/8" fittings, and a bracket with bolts to mount the control valve to your blast pot. Part # 0005-410A — Quick view Add to Cart

Abrasive Blast Supply

Conversion Kit (Pneumatic to Electric)

$900.00

Replacement part suitable for Flow®. Hydraulic adapter, male to female. — Quick view Add to Cart

AccuStream

Hydraulic Adapter, Male to Female

$8.80

Repair Kit for 3-Wire - Part # WT1001-KIT-3 — Quick view Add to Cart

Western Technology

3-Wire Repair Kit

$82.80

Brass Strainer, 1/4" Thread, Schmidt - Part # 2301-902-90 — Quick view Add to Cart

Schmidt

Brass Strainer

$119.00

Ball and Chain - Part # WT1102 — Quick view Add to Cart

Western Technology

Ball and Chain

$22.40

Type II Urea media is the most versatile plastic abrasive for stripping paint and removing coatings from cars, aircraft, trucks, trailers, trains, vans, buses and steel. For over 30 years, Composition Materials has custom manufactured plastic media abrasives from 100% recycled raw materials for low-cost, environmentally safe paint removal with quick cutting action. Urea plastic blast media is available in all standard sizes from coarse to medium to fine, as well as custom sizing. When blasting, optimal blast parameters (psi & nozzle distance) ensure best results. Also available: granular Urea abrasives, powders and flours for non-skid applications as well as economical fillers in paints, coatings and cleaning applications. Mil-Spec MIL-P-85891A approved. — Quick view

Composition Materials Company

12/16 Grit Type II UREA Plastic Media

Clemco CPF-20 air filter, with regulator, up to 2 operators. Part # CL03578.

Clemco CPF-80 air filter, with regulator, up to 4 operators. Part # CL03527.

Overview

Particulate filter for breathing air supplied from a compressed air source. Features pressure regulator, mounting bracket for floor or wall mounting. CPF-20 services one or two operators; CPF-80 services up to four operators. The CPF filter removes mists, including oil mists, water vapor, and particulates greater in size than 0.5 micron. Compressed Grade D quality breathing air as defined by the Compressed Gas Association commodity specification.

Description of Operation

The CPF filter is placed in the breathing-air line between the breathing-air source and the respirator supply hose. The CPF is the point of attachment for the respirator hose. Air enters the filter through one of the inlet ports. Moisture is removed by expansion in the outer chamber and is drained through the petcock at the bottom of the unit. The air passes through a replaceable filter cartridge. The outlet pressure is controlled by a regulator on the cap and is measured by a gauge downstream from the cartridge.

Approvals and Certifications

CPF filters comply with OSHA regulation 1910.94 (6) as a component of a total respirator system. To comply with OSHA regulation 1910.134 (d), the system must also include a NIOSH-approved supplied-air respirator and carbon monoxide (CO) monitoring and/or removal system. — Quick view Choose Options

Clemco

Clemco® Breathing Canister

$428.00 - $565.00

Accustream replacement focusing tube (nozzle) for KMT® .375 ROCTEC 100 focusing tube. Nozzle sizes range from .030"-.063". Nozzle length size of 3". Replaces part #'s 10126969, 10126928 & 10126936. — Quick view Choose Options

AccuStream

.375 ROCTEC® 100 Focusing Tubes

$75.00

Replacement part suitable for Flow®. Piston snap ring. Replaces part # A-0270-250. — Quick view Add to Cart

AccuStream

Piston Snap Ring

$3.65

#13 Glass Bead sold in 50lb Bags. Full skid size of 2,000lbs. Will ship any quantity. — Quick view

Potters Industries

#13 Glass Bead

Conversion kit, pneumatic to electric. Kit includes control valve with dust eliminator, brass strainer, and 2-wire 12-V power supply with male and female three-prong plugs (fully assembled as seen in picture above). Kit also includes deadman with male plug attached, 55ft extension with male and female plugs, 25ft power cord with alligator clips and female plug, 6ft of 1/4" push-on hose with 1/4" and 1/8" fittings, and a bracket with bolts to mount the control valve to your blast pot. Part # 0005-410A — Quick view Add to Cart

Abrasive Blast Supply

Conversion Kit (Pneumatic to Electric)

$900.00

Recognized and trusted around the globe, Schmidt portable blasting systems are designed to provide the lowest pressure drop while using a wide range of media. Available in packages or individually, the low maintenance design minimizes downtime and increases productivity. Custom systems can be designed to meet specific needs with a multitude of options. These units feature normally closed, fail-safe valves and controls for greater safety and performance. — Quick view

Schmidt

Remote Package "6.5C" (Pressure Hold)

$9,526.43